ABS-02 $10.00
Bellows Style
Air Bag Suspension
This is a 8 pc. set that includes:
2 - Hollow Rubber Bellows
2 - Billet Upper Suspension Mounts
2 - Billet Lower Suspension Mounts
2 - Aluminum Adjustment Shafts
The upper and lower mounts are drilled to accept the included Adjustment Shafts. To adjust the ride height of the vehicle trim the Adjustment Shaft to the length needed and epoxy it into the Lower Suspension Mount and then using a clear adhesive attach the Bellows to the Bottom Mount. Apply a drop of epoxy to the inside hole on the Upper Suspension Mount and insert the Adjustment Shaft into the hole sandwiching the Bellows between the Mounts. Use a toothpick to bring the top of the Bellows out and around the shoulder on the Upper Suspension Mount and apply a small amount of clear adhesive. Repeat on both units.
